pinewood

Wippy from Mid Yell

A shetlink gamers party, that would be pretty cool. Am deffo up for that

same thing happened to ours last night, an item of washing had jammed the drum causing the belt to come off. Make sure the machine is unplugged. 2 screws on the back cover and remove the panel. depending on what model number the motor will be at the top or bottom of the machine. If the belts off, check for any damage eg snapped or badly worn, If it is you'll need to order a new one. The part number and belt length should be printed on the belt. If its ok put it back on to the motor spindle first then onto the right hand side of the pully wheel on the back of the drum and turn the wheel anti clock wise.You will also need to make sure the belt is on straight and inline with the pully wheel, if not the belt will come off again. Just keep turning it a few times and watch the motor spindle to see if the belt moves There isn't much space behind there to work so i normally take off the top cover too. This is a pretty easy diy fix and could save you the call out and repair charges if it is the problem.

www.k-tintz.co.uk will be up staying with me 24th - 30th July. If anyone needs it doing give him a ring and he'll bring his stuff and tints with him. He would need some sheltered to do it ( garage etc) unless you fancy a trip upto Yell to have it done.

sky dish up here is the bigger 60cm dish, unless its treated you'll be lucky if it last a year before it rusts. You can get a galvanised one I think from islesat, more expensive than the standard sky one but the guaranteed for 10yrs